|
|
| Flame
Protection
A small selection from our product range |
| |
|
Flame Protection Suit
NOMEX®
Outershell tough |
|
hardly inflammable, permanently
antistatic,
consisting of:
|
Fire Fighter Over Jacket
FIRE FIGHTER 4-layered
MODEL 8001 |
|
Cat. no.: 1896/B/BUND/TRIM |
|
1. NOMEX®
Outershell tough, 195 g/m², dark blue, antistatic
2. ISOTEMP®-TEX
II wetness protective membrane, firmly sewed-in
3. thermo lining made of NOMEX® III and backstitched
with knitwear consisting of NOMEX®, 140 + 220
= 360 g/m², firmly sewed-in
|
|
2 set-in pockets with flaps, loop for gloves under left pocket
flap, sleeves with VELCRO bar tack for tight adjustment, 60
cm front zipper with a 12 cm covering panel, turn-up collar
with VELCRO bar tack, fly brake in the sleeves with outer fabric
panel, inner pocket on the right with whistle loop, 1 set-in
pocket for wireless CB on the left with oblique flap and VELCRO,
over that a loop for microphone and antenna, VELCRO for back
inscription, breast VELCRO on the right for name badge |
Reflective
stripes:
3M / TRIM 9587 firmly sewed-on
- at jacket seam 2 x 50 mm
- breast left and right
75 mm
- per forearm 1 single
stripe all around 75 mm
- back left and right
75 mm
- back inscription FEUERWEHR 8 x 38 cm, on VELCRO
Approvals:
EN 469 approved
HUPF-approval no. D-ÜJ-97.0.4810
0516 Z 149.153/96/CE
Thermoman test Genf: June 1997
DuPont quality programme
|
Fire Fighter Over Trousers
FIRE FIGHTER threefold-layered
MODEL 8001, FORM A HUPF Part 4 |
|
Cat. no.: 1897/B/BUND/TRIM/A |
| 1. |
NOMEX®
Outershell tough, 220 g/m², dark blue, antistatic |
| 2. |
ISOTEMP®-TEX
II wetness protective membrane, firmly sewed-in |
| 3. |
NOMEX®
III antistatic, firmly sewed-in
high trouser with elastic in the waistband, outside knee
reinforcement made of Kevlar® and covered
with NOMEX®, elastic braces with quick
fastener, 20 cm wetness protective membrane at the inside
of the trouser legs starting at the seam, variable waist
via back strap |
| |
|
| |
Reflective stripes
3M / TRIM / 9587 /
firmly sewed-on: |
| 1. |
200 mm above the
trouser leg seams, all around, width per strip: 75 mm |
| 2. |
next to the side
seam at the back trouser, single vertically 50 cm long,
width per strip: 50.8 mm |
|
| Approvals: |
EN
469 approved
HESSEN 0516-Z 149.153/96/CE
HUPF-approved no. D-ÜH-Z0.0.1365/* |
| Sizes: |
| 0 |
= |
46/48 |
no surcharge |
|
| I |
= |
50/52 |
no surcharge |
|
| II |
= |
54/56 |
no surcharge |
|
| III |
= |
58/60 |
+ 5
% |
surcharge |
| IV |
= |
62/64 |
+ 10
% |
surcharge |
When
placing an order please state the requested
size.
|
| |
|
 |
| NOMEX®
and KEVLAR®
are registered trademarks of DuPONT
|
|
|
